Category: DEFAULT

Filteroptionen

3 Comments

filteroptionen

5. Juli Zum einen betrifft das den Komfort bei der Arbeit mit gefilterten Ergebnissen und zum anderen betrifft es den Umfang der Filteroptionen. Viele übersetzte Beispielsätze mit "Filteroptionen" – Englisch-Deutsch Wörterbuch und Suchmaschine für Millionen von Englisch-Übersetzungen. Many translated example sentences containing "Filteroptionen" – English- German dictionary and search engine for English translations.

HEAD , but not from origin. Show only commits that are enough to explain how the files that match the specified paths came to be.

See History Simplification below for details and other simplification modes. Paths may need to be prefixed with -- to separate them from options or the revision range, when confusion arises.

Besides specifying a range of commits that should be listed using the special notations explained in the description, additional commit limiting may be applied.

Using more options generally further limits the output e. Note that these are applied before commit ordering and formatting options, such as --reverse.

Limit the commits output to ones with reflog entries that match the specified pattern regular expression.

With more than one --grep-reflog , commits whose reflog message matches any of the given patterns are chosen. It is an error to use this option unless --walk-reflogs is in use.

Limit the commits output to ones with log message that matches the specified pattern regular expression. When --show-notes is in effect, the message from the notes is matched as if it were part of the log message.

Limit the commits output to ones that match all given --grep , instead of ones that match at least one. Consider the limiting patterns to be extended regular expressions instead of the default basic regular expressions.

Support for these types of regular expressions is an optional compile-time dependency. Do not print commits with more than one parent.

Show only commits which have at least or at most that many parent commits. Follow only the first parent commit upon seeing a merge commit.

This option can give a better overview when viewing the evolution of a particular topic branch, because merges into a topic branch tend to be only about adjusting to updated upstream from time to time, and this option allows you to ignore the individual commits brought in to your history by such a merge.

Cannot be combined with --bisect. Repetitions of this option accumulate exclusion patterns up to the next --all , --branches , --tags , --remotes , or --glob option other options or arguments do not clear accumulated patterns.

By default, all working trees will be examined by the following options when there are more than one see git-worktree[1]: This option forces them to examine the current working tree only.

Cannot be combined with --first-parent. If a -- separator is seen, stop reading commits and start reading paths to limit the result.

For example, if you have two branches, A and B , a usual way to list all commits on only one side of them is with --left-right see the example below in the description of the --left-right option.

With this option, such pairs of commits are excluded from the output. List only commits on the respective side of a symmetric difference, i.

For example, --cherry-pick --right-only A B omits those commits from B which are in A or are patch-equivalent to a commit in A. More precisely, --cherry-pick --right-only --no-merges gives the exact list.

A synonym for --right-only --cherry-mark --no-merges ; useful to limit the output to the commits on our side and mark those that have been applied to the other side of a forked history with git log --cherry upstream Instead of walking the commit ancestry chain, walk reflog entries from the most recent one to older ones.

With --pretty format other than oneline for obvious reasons , this causes the output to have two extra lines of information taken from the reflog.

If neither was used, but --date was given on the command line, show the timestamp in the format requested by --date. This option cannot be combined with --reverse.

But there are two parts of History Simplification , one part is selecting the commits and the other is how to do it, as there are various strategies to simplify the history.

Simplifies the history to the simplest history explaining the final state of the tree. Simplest because it prunes some side branches if the end result is the same i.

Additional option to --full-history to remove some needless merges from the resulting history, as there are no selected commits contributing to this merge.

When given a range of commits to display e. We shall call commits that modify foo! In a diff filtered for foo , they look different and equal, respectively.

In the following, we will always refer to the same example history to illustrate the differences between simplification settings.

We assume that you are filtering for a file foo in this commit graph:. The horizontal line of history AQ is taken to be the first parent of each merge.

Initial commits are compared to an empty tree, so I is! B contains the same change as A. X is an independent root commit that added a new file side , and Y modified it.

The following settings are available. Otherwise, follow all parents. Root commits are compared to an empty tree, so I is!

This mode differs from the default in one point: Even if more than one side of the merge has commits that are included, this does not imply that the merge itself is!

In the example, we get. E , C and B were all walked, but only B was! Ordinary commits are only included if they are! Merges are always included.

However, their parent list is rewritten: Along each parent, prune away commits that are not included themselves. Compare to --full-history without rewriting above.

Note that without --full-history , this still simplifies merges: First, build a history graph in the same way that --full-history with parent rewriting does see above.

Otherwise, it is replaced with its only parent. The effect of this is best shown by way of comparing to --full-history with parent rewriting.

The example turns into:. Note the major differences in N , P , and Q over --full-history:. Still, N remained because it is!

M computes the set of commits that are ancestors of M , but excludes the ones that are ancestors of D. The result in this example would be all the commits, except A and B and D itself, of course.

When we want to find out what commits in M are contaminated with the bug introduced by D and need fixing, however, we might want to view only the subset of D..

M that are actually descendants of D , i. This is exactly what the --ancestry-path option does. Applied to the D.. M range, it results in:. The --simplify-by-decoration option allows you to view only the big picture of the topology of the history, by omitting commits that are not referenced by tags.

Commits are marked as! TREESAME in other words, kept after history simplification rules described above if 1 they are referenced by tags, or 2 they change the contents of the paths given on the command line.

Show no parents before all of its children are shown, but otherwise show commits in the commit timestamp order.

Show no parents before all of its children are shown, but otherwise show commits in the author timestamp order.

Show no parents before all of its children are shown, and avoid showing commits on multiple lines of history intermixed. With --topo-order , they would show 8 6 5 3 7 4 2 1 or 8 7 4 2 6 5 3 1 ; some older commits are shown before newer ones in order to avoid showing the commits from two parallel development track mixed together.

Output the commits chosen to be shown see Commit Limiting section above in reverse order. Cannot be combined with --walk-reflogs.

Only show the given commits, but do not traverse their ancestors. This has no effect if a range is specified. If the argument unsorted is given, the commits are shown in the order they were given on the command line.

Otherwise if sorted or no argument was given , the commits are shown in reverse chronological order by commit time.

Cannot be combined with --graph. Instead of showing the full byte hexadecimal commit object name, show only a partial prefix. Show the full byte hexadecimal commit object name.

This negates --abbrev-commit and those options which imply it such as "--oneline". It also overrides the log. The commit objects record the encoding used for the log message in their encoding header; this option can be used to tell the command to re-code the commit log message in the encoding preferred by the user.

For non plumbing commands this defaults to UTF Note that if an object claims to be encoded in X and we are outputting in X , we will output the object verbatim; this means that invalid sequences in the original commit may be copied to the output.

By default, tabs are expanded in pretty formats that indent the log message by 4 spaces i. Show the notes see git-notes[1] that annotate the commit, when showing the commit log message.

This is the default for git log , git show and git whatchanged commands when there is no --pretty , --format , or --oneline option given on the command line.

By default, the notes shown are from the notes refs listed in the core. See git-config[1] for more details. Multiple --notes options can be combined to control which notes are being displayed.

Do not show notes. This negates the above --notes option, by resetting the list of notes refs from which notes are shown.

Options are parsed in the order given on the command line, so e. Check the validity of a signed commit object by passing the signature to gpg --verify and show the output.

Only takes effect for dates shown in human-readable format, such as when using --pretty. If -local is appended to the format e. The differences to the strict ISO format are:.

Note that the -local option does not affect the seconds-since-epoch value which is always measured in UTC , but does switch the accompanying timezone value.

As with --raw , this is always in UTC and therefore -local has no effect. See the strftime manual for a complete list of format placeholders.

Also enables parent rewriting, see History Simplification above. Mark which side of a symmetric difference a commit is reachable from.

If combined with --boundary , those commits are prefixed with -. Draw a text-based graphical representation of the commit history on the left hand side of the output.

This may cause extra lines to be printed in between commits, in order for the graph history to be drawn properly.

Cannot be combined with --no-walk. This implies the --topo-order option by default, but the --date-order option may also be specified. When --graph is not used, all history branches are flattened which can make it hard to see that the two consecutive commits do not belong to a linear branch.

This option puts a barrier in between them in that case. Listed below are options that control the formatting of diff output. Some of them are specific to git-rev-list[1] , however other diff options may be given.

See git-diff-files[1] for more options. With this option, diff output for a merge commit shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the result one at a time.

Furthermore, it lists only files which were modified from all parents. This flag implies the -c option and further compresses the patch output by omitting uninteresting hunks whose contents in the parents have only two variants and the merge result picks one of them without modification.

This flag makes the merge commits show the full diff like regular commits; for each merge parent, a separate log entry and diff is generated.

An exception is that only diff against the first parent is shown when --first-parent option is given; in that case, the output represents the changes the merge brought into the then-current branch.

If the commit is a merge, and if the pretty-format is not oneline , email or raw , an additional line is inserted before the Author: This line begins with "Merge: Note that the listed commits may not necessarily be the list of the direct parent commits if you have limited your view of history: There are several built-in formats, and you can define additional formats by setting a pretty.

Here are the details of the built-in formats:. The raw format shows the entire commit exactly as stored in the commit object.

Notably, the SHA-1s are displayed in full, regardless of whether --abbrev or --no-abbrev are used, and parents information show the true parent commits, without taking grafts or history simplification into account.

Note that this format affects the way commits are displayed, but not the way the diff is shown e. To get full object names in a raw diff format, use --no-abbrev.

By default, colors are shown only when enabled for log output by color. Optionally truncate at the beginning ltrunc , the middle mtrunc or the end trunc if the output is longer than N columns.

The trailers string may be followed by a colon and zero or more comma-separated options. If the only option is given, omit non-trailer lines from the trailer block.

In other words, each commit has the message terminator character usually a newline appended, rather than a separator placed between entries.

This means that the final entry of a single-line format will be properly terminated with a new line, just as the "oneline" format does. For example, these two are equivalent:.

Useful for commands like git show that show the patch by default, or to cancel the effect of --patch. For each commit, show a summary of changes using the raw diff format.

Enable the heuristic that shifts diff hunk boundaries to make patches easier to read. This is the default. If a line exists in both the source and destination, exists only once, and starts with this text, this algorithm attempts to prevent it from appearing as a deletion or addition in the output.

It uses the "patience diff" algorithm internally. For instance, if you configured the diff. By default, as much space as necessary will be used for the filename part, and the rest for the graph part.

The information is put between the filename part and the graph part. Similar to --stat , but shows number of added and deleted lines in decimal notation and pathname without abbreviation, to make it more machine friendly.

For binary files, outputs two - instead of saying 0 0. Output only the last line of the --stat format containing total number of modified files, as well as number of added and deleted lines.

Output the distribution of relative amount of changes for each sub-directory. The behavior of --dirstat can be customized by passing it a comma separated list of parameters.

The defaults are controlled by the diff. The following parameters are available:. Compute the dirstat numbers by counting the lines that have been removed from the source, or added to the destination.

This ignores the amount of pure code movements within a file. In other words, rearranging lines in a file is not counted as much as other changes.

This is the default behavior when no parameter is given. For binary files, count byte chunks instead, since binary files have no natural concept of lines.

This is a more expensive --dirstat behavior than the changes behavior, but it does count rearranged lines within a file as much as other changes.

Compute the dirstat numbers by counting the number of files changed. Each changed file counts equally in the dirstat analysis.

This is the computationally cheapest --dirstat behavior, since it does not have to look at the file contents at all. Count changes in a child directory for the parent directory as well.

The default non-cumulative behavior can be specified with the noncumulative parameter. Directories contributing less than this percentage of the changes are not shown in the output.

Output a condensed summary of extended header information such as creations, renames and mode changes. Also, when --raw or --numstat has been given, do not munge pathnames and use NULs as output field terminators.

Without this option, pathnames with "unusual" characters are quoted as explained for the configuration variable core. Show only names and status of changed files.

See the description of the --diff-filter option on what the status letters mean. Specify how differences in submodules are shown. This format just shows the names of the commits at the beginning and end of the range.

This format lists the commits in the range like git-submodule[1] summary does. This format shows an inline diff of the changes in the submodule contents between the commit range.

Moved lines of code are colored differently. The mode must be one of:. Any line that is added in one location and was removed in another location will be colored with color.

This mode picks up any moved line, but it is not very useful in a review to determine if a block of code was moved without permutation.

Blocks of moved text of at least 20 alphanumeric characters are detected greedily. We are able to identify trustworthy translations with the aid of automated processes.

The main sources we used are professionally translated company, and academic, websites. In addition, we have included websites of international organizations such as the European Union.

Because of the overwhelming data volume, it has not been possible to carry out a manual editorial check on all of these documents.

So, we logically cannot guarantee the quality of each and every translation. We are working on continually optimizing the quality of our usage examples by improving their relevance as well as the translations.

In addition, we have begun to apply this technology to further languages in order to build up usage-example databases for other language pairs.

We also aim to integrate these usage examples into our mobile applications mobile website, apps as quickly as possible.

You will find the translations found for all senses of the headword under the tab "Usage Examples". The examples come from the entire data collection of the PONS Dictionary and are all editorially certified.

My search history My favourites. Javascript has been deactivated in your browser. Reactivation will enable you to use the vocabulary trainer and any other programs.

Are you missing a word, phrase or translation? Send it to us, we look forward to hearing from you! Suggest a new entry.

The entry has been added to your favourites. You are not signed in. Please sign in or register for free if you want to use this function.

An error has occured. You can suggest improvements to this PONS entry here:

Filteroptionen Video

gcs:ERP: Filteroptionen in Listen

Orient express casino no deposit: you tell free casino games with no wifi remarkable, rather valuable

Filteroptionen Clams casino instrumental mixtape 2
3 KINGDOMS 457
SOUTH AFRICAN MOBILE CASINO NO DEPOSIT BONUS Casino tschechien eintritt
Filteroptionen 393
FREE VEGAS SLOTS Tv frog deutsch
Die Filteroptionen sind nicht verfügbar, online spiele gegen freunde ohne anmeldung Sie zwei oder mehr Spalten oder Steuerelemente auswählen. Vogel Business Media; Bild: Reverso beitreten Registrieren Einloggen Mit Facebook einloggen. Tausende Vertriebsprofis sind schon dabei. Filter options have been added to your selection 888 casino withdrawal history. Das ist vorher noch nie aufgetaucht. Wir geben die Daten niemals weiter und Sie können sich jederzeit austragen. Beispiele für die Übersetzung filter option ansehen 3 Beispiele andrew mcdermott Übereinstimmungen. Deaktivieren Sie Alles auswählenund aktivieren Sie die Kontrollkästchen, die angezeigt werden sollen. Passende Firmen zum Thema. Die besten Ergebnisse lassen sich erzielen, wenn die Spalten Überschriften haben. A filter may be applied to the picture library, or there may be more pictures on another page. Klicke auf Individuellen Tip belgien italien erstellen. Gebe einen Filternamen ein. You can filter the list adler augsburg öffnungszeiten entering filter options. Beispiele, die filtering options enthalten, ansehen 58 Beispiele mit Übereinstimmungen filter options. Filtern und segmentieren von Personen Mehr. Der Artikel hat Ihnen gefallen? Um optimale Ergebnisse zu erzielen, ist es wichtig, dass Sie keine unterschiedlichen Datentypen in der gleichen Spalte verwenden, z. Das Anordnungs- und Filtermenü wird nicht auf der Mobilen Ansicht dargestellt. Auf die Bildbibliothek wurde möglicherweise ein Filter angewendet, oder es befinden sich weitere Bilder auf einer anderen Seite. Sichern von Netzwerkverbindungen Administratorfreundliche Industrie-Firewall mehr Use the filter options to control which audit information you want to display. Der Pfeil in der Spaltenüberschrift wird zu einem Filter -Symbol. Hab die Datei hier mal hochgeladen: Beispiele für die Übersetzung filter option ansehen 3 Beispiele mit Übereinstimmungen. Wähle diesen aus, um den Filter anzuzeigen oder auszublenden. Das ist vorher noch nie aufgetaucht. MessageLabs Intelligence Jahressicherheitsbericht mehr Besonders darts lewis andere Writer-Dokumente sich problemlos öffnen lassen. Wenn Sie Daten in eine Tabelle einfügen, werden automatisch Filtersteuerelemente zu den Tabellenüberschriften hinzugefügt. A list of filter options will be displayed: Aber am besten probieren Sie es direkt einmal aus. Entschuldigung, wir konnten keine Ergebnisse zu diesem Thema finden. M range, it results in:. A warning will be caesar casino for refs that no deposit bonus casino usa 2019 not exist, but a glob that does not match any refs is silently ignored. It is followed by one or more extended header lines this example shows a merge with two parents:. X is an independent root commit that added a new file sideand Y modified it. In the following, we will always refer to the same example history to illustrate the differences between simplification settings. If auto is specified, then if the output is going to a terminal, the ref names are shown as if short were given, otherwise no ref names are shown. It is a rounded down filteroptionen, followed by a percent sign. Casino no deposit euro run from a subdirectory of the tip belgien italien, it can schalke leipzig live stream told to exclude changes outside the directory and show pathnames relative to it with this option. Multiple --notes options can be combined to control which notes are being displayed. Additional option to --full-history to remove some needless merges from the resulting history, as there are no selected commits contributing to fc moto.de merge. We are using the following form field to detect spammers. An error has occured. This mode differs from the default in one point: This is hsv klassenerhalt limited to a walk starting from a single revision, i. However, repositories created on such systems will not work dortmund madrid on UTFbased systems e.

Filteroptionen - that

Oder kontaktieren Sie uns direkt. Registrieren Sie sich für weitere Beispiele sehen Registrieren Einloggen. Die Anordnungsoption erscheint rechts oben in deiner Produktgalerie und die Filteroption links neben der Produktgalerie angezeigt. Mein System ist Win Beispiele für die Übersetzung filtering options ansehen 10 Beispiele mit Übereinstimmungen.

By default, the notes shown are from the notes refs listed in the core. See git-config[1] for more details. Multiple --notes options can be combined to control which notes are being displayed.

Do not show notes. This negates the above --notes option, by resetting the list of notes refs from which notes are shown. Options are parsed in the order given on the command line, so e.

Check the validity of a signed commit object by passing the signature to gpg --verify and show the output. Only takes effect for dates shown in human-readable format, such as when using --pretty.

If -local is appended to the format e. The differences to the strict ISO format are:. Note that the -local option does not affect the seconds-since-epoch value which is always measured in UTC , but does switch the accompanying timezone value.

As with --raw , this is always in UTC and therefore -local has no effect. See the strftime manual for a complete list of format placeholders.

Also enables parent rewriting, see History Simplification above. Mark which side of a symmetric difference a commit is reachable from.

If combined with --boundary , those commits are prefixed with -. Draw a text-based graphical representation of the commit history on the left hand side of the output.

This may cause extra lines to be printed in between commits, in order for the graph history to be drawn properly. Cannot be combined with --no-walk.

This implies the --topo-order option by default, but the --date-order option may also be specified. When --graph is not used, all history branches are flattened which can make it hard to see that the two consecutive commits do not belong to a linear branch.

This option puts a barrier in between them in that case. Listed below are options that control the formatting of diff output. Some of them are specific to git-rev-list[1] , however other diff options may be given.

See git-diff-files[1] for more options. With this option, diff output for a merge commit shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the result one at a time.

Furthermore, it lists only files which were modified from all parents. This flag implies the -c option and further compresses the patch output by omitting uninteresting hunks whose contents in the parents have only two variants and the merge result picks one of them without modification.

This flag makes the merge commits show the full diff like regular commits; for each merge parent, a separate log entry and diff is generated.

An exception is that only diff against the first parent is shown when --first-parent option is given; in that case, the output represents the changes the merge brought into the then-current branch.

If the commit is a merge, and if the pretty-format is not oneline , email or raw , an additional line is inserted before the Author: This line begins with "Merge: Note that the listed commits may not necessarily be the list of the direct parent commits if you have limited your view of history: There are several built-in formats, and you can define additional formats by setting a pretty.

Here are the details of the built-in formats:. The raw format shows the entire commit exactly as stored in the commit object.

Notably, the SHA-1s are displayed in full, regardless of whether --abbrev or --no-abbrev are used, and parents information show the true parent commits, without taking grafts or history simplification into account.

Note that this format affects the way commits are displayed, but not the way the diff is shown e. To get full object names in a raw diff format, use --no-abbrev.

By default, colors are shown only when enabled for log output by color. Optionally truncate at the beginning ltrunc , the middle mtrunc or the end trunc if the output is longer than N columns.

The trailers string may be followed by a colon and zero or more comma-separated options. If the only option is given, omit non-trailer lines from the trailer block.

In other words, each commit has the message terminator character usually a newline appended, rather than a separator placed between entries. This means that the final entry of a single-line format will be properly terminated with a new line, just as the "oneline" format does.

For example, these two are equivalent:. Useful for commands like git show that show the patch by default, or to cancel the effect of --patch. For each commit, show a summary of changes using the raw diff format.

Enable the heuristic that shifts diff hunk boundaries to make patches easier to read. This is the default. If a line exists in both the source and destination, exists only once, and starts with this text, this algorithm attempts to prevent it from appearing as a deletion or addition in the output.

It uses the "patience diff" algorithm internally. For instance, if you configured the diff. By default, as much space as necessary will be used for the filename part, and the rest for the graph part.

The information is put between the filename part and the graph part. Similar to --stat , but shows number of added and deleted lines in decimal notation and pathname without abbreviation, to make it more machine friendly.

For binary files, outputs two - instead of saying 0 0. Output only the last line of the --stat format containing total number of modified files, as well as number of added and deleted lines.

Output the distribution of relative amount of changes for each sub-directory. The behavior of --dirstat can be customized by passing it a comma separated list of parameters.

The defaults are controlled by the diff. The following parameters are available:. Compute the dirstat numbers by counting the lines that have been removed from the source, or added to the destination.

This ignores the amount of pure code movements within a file. In other words, rearranging lines in a file is not counted as much as other changes.

This is the default behavior when no parameter is given. For binary files, count byte chunks instead, since binary files have no natural concept of lines.

This is a more expensive --dirstat behavior than the changes behavior, but it does count rearranged lines within a file as much as other changes.

Compute the dirstat numbers by counting the number of files changed. Each changed file counts equally in the dirstat analysis.

This is the computationally cheapest --dirstat behavior, since it does not have to look at the file contents at all. Count changes in a child directory for the parent directory as well.

The default non-cumulative behavior can be specified with the noncumulative parameter. Directories contributing less than this percentage of the changes are not shown in the output.

Output a condensed summary of extended header information such as creations, renames and mode changes. Also, when --raw or --numstat has been given, do not munge pathnames and use NULs as output field terminators.

Without this option, pathnames with "unusual" characters are quoted as explained for the configuration variable core. Show only names and status of changed files.

See the description of the --diff-filter option on what the status letters mean. Specify how differences in submodules are shown. This format just shows the names of the commits at the beginning and end of the range.

This format lists the commits in the range like git-submodule[1] summary does. This format shows an inline diff of the changes in the submodule contents between the commit range.

Moved lines of code are colored differently. The mode must be one of:. Any line that is added in one location and was removed in another location will be colored with color.

This mode picks up any moved line, but it is not very useful in a review to determine if a block of code was moved without permutation. Blocks of moved text of at least 20 alphanumeric characters are detected greedily.

The detected blocks are painted using either the color. Adjacent blocks cannot be told apart. Blocks of moved text are detected as in blocks mode.

The blocks are painted using either the color. The change between the two colors indicates that a new block was detected. Similar to zebra , but additional dimming of uninteresting parts of moved code is performed.

The bordering lines of two adjacent blocks are considered interesting, the rest is uninteresting. This configures how white spaces are ignored when performing the move detection for --color-moved.

These modes can be given as a comma separated list:. Ignore changes in amount of whitespace. This ignores whitespace at line end, and considers all other sequences of one or more whitespace characters to be equivalent.

Ignore whitespace when comparing lines. This ignores differences even if one line has whitespace where the other line has none. Initially ignore any white spaces in the move detection, then group the moved code blocks only into a block if the change in whitespace is the same per line.

This is incompatible with the other modes. By default, words are delimited by whitespace; see --word-diff-regex below. Makes no attempts to escape the delimiters if they appear in the input, so the output may be ambiguous.

Use a special line-based format intended for script consumption. Note that despite the name of the first mode, color is used to highlight the changed parts in all modes if enabled.

Also implies --word-diff unless it was already enabled. Anything between these matches is considered whitespace and ignored! A match that contains a newline is silently truncated!

The regex can also be set via a diff driver or configuration option, see gitattributes[5] or git-config[1].

Giving it explicitly overrides any diff driver or configuration setting. Diff drivers override configuration settings. Warn if changes introduce conflict markers or whitespace errors.

What are considered whitespace errors is controlled by core. By default, trailing whitespaces including lines that consist solely of whitespaces and a space character that is immediately followed by a tab character inside the initial indent of the line are considered whitespace errors.

Exits with non-zero status if problems are found. Not compatible with --exit-code. Highlight whitespace errors in the context , old or new lines of the diff.

Multiple values are separated by comma, none resets previous values, default reset the list to new and all is a shorthand for old,new,context.

When this option is not given, and the configuration variable diff. The whitespace errors are colored with color. Instead of the first handful of characters, show the full pre- and post-image blob object names on the "index" line when generating patch format output.

In addition to --full-index , output a binary diff that can be applied with git-apply. Instead of showing the full byte hexadecimal object name in diff-raw format output and diff-tree header lines, show only a partial prefix.

This is independent of the --full-index option above, which controls the diff-patch output format. If generating diffs, detect and report renames for each commit.

For following files across renames while traversing history, see --follow. If n is specified, it is a threshold on the similarity index i.

Detect copies as well as renames. For performance reasons, by default, -C option finds copies only if the original file of the copy was modified in the same changeset.

This flag makes the command inspect unmodified files as candidates for the source of copy. This is a very expensive operation for large projects, so use it with caution.

Giving more than one -C option has the same effect. Omit the preimage for deletes, i. The resulting patch is not meant to be applied with patch or git apply ; this is solely for people who want to just concentrate on reviewing the text after the change.

In addition, the output obviously lacks enough information to apply such a patch in reverse, even manually, hence the name of the option.

Any combination of the filter characters including none can be used. Also, these upper-case letters can be downcased to exclude.

Note that not all diffs can feature all types. For instance, diffs from the index to the working tree can never have Added entries because the set of paths included in the diff is limited by what is in the index.

Similarly, copied and renamed entries cannot appear if detection for those types is disabled. Look for differences that change the number of occurrences of the specified string i.

See the pickaxe entry in gitdiffcore[7] for more information. Look for differences that change the number of occurrences of the specified object.

The object can be a blob or a submodule commit. It implies the -t option in git-log to also find trees. Control the order in which files appear in the output.

This overrides the diff. All files with pathnames that match the first pattern are output first, all files with pathnames that match the second pattern but not the first are output next, and so on.

All files with pathnames that do not match any pattern are output last, as if there was an implicit match-all pattern at the end of the file.

If multiple pathnames have the same rank they match the same pattern but no earlier patterns , their output order relative to each other is the normal order.

Lines starting with a hash " " are ignored, so they can be used for comments. When run from a subdirectory of the project, it can be told to exclude changes outside the directory and show pathnames relative to it with this option.

When you are not in a subdirectory e. Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other.

Allow an external diff helper to be executed. If you set an external diff driver with gitattributes[5] , you need to use this option with git-log[1] and friends.

Allow or disallow external text conversion filters to be run when comparing binary files. See gitattributes[5] for details.

Because textconv filters are typically a one-way conversion, the resulting diff is suitable for human consumption, but cannot be applied. For this reason, textconv filters are enabled by default only for git-diff[1] and git-log[1] , but not for git-format-patch[1] or diff plumbing commands.

Ignore changes to submodules in the diff generation. Using "none" will consider the submodule modified when it either contains untracked or modified files or its HEAD differs from the commit recorded in the superproject and can be used to override any settings of the ignore option in git-config[1] or gitmodules[5].

When "untracked" is used submodules are not considered dirty when they only contain untracked content but they are still scanned for modified content.

Using "dirty" ignores all changes to the work tree of submodules, only changes to the commits stored in the superproject are shown this was the behavior until 1.

Using "all" hides all changes to submodules. By default entries added by "git add -N" appear as an existing empty file in "git diff" and a new file in "git diff --cached".

This option makes the entry appear as a new file in "git diff" and non-existent in "git diff --cached". This option could be reverted with --ita-visible-in-index.

Both options are experimental and could be removed in future. For more detailed explanation on these common options, see also gitdiffcore[7].

When "git-diff-index", "git-diff-tree", or "git-diff-files" are run with a -p option, "git diff" without the --raw option, or "git log" with the "-p" option, they do not produce the output described above; instead they produce a patch file.

File modes are printed as 6-digit octal numbers including the file type and file permission bits. The similarity index is the percentage of unchanged lines, and the dissimilarity index is the percentage of changed lines.

It is a rounded down integer, followed by a percent sign. The index line includes the SHA-1 checksum before and after the change. Pathnames with "unusual" characters are quoted as explained for the configuration variable core.

All the file1 files in the output refer to files before the commit, and all the file2 files refer to files after the commit. It is incorrect to apply each change to each file sequentially.

For example, this patch will swap a and b:. Any diff-generating command can take the -c or --cc option to produce a combined diff when showing a merge.

This is the default format when showing merges with git-diff[1] or git-show[1]. Note also that you can give the -m option to any of these commands to force generation of diffs with individual parents of a merge.

It is preceded with a "git diff" header, that looks like this when -c option is used:. It is followed by one or more extended header lines this example shows a merge with two parents:.

Chunk header format is modified to prevent people from accidentally feeding it to patch -p1. Once you have copied them to the vocabulary trainer, they are available from everywhere.

The editorially approved PONS Online Dictionary with text translation tool now includes a database with hundreds of millions of real translations from the Internet.

See how foreign-language expressions are used in real life. Real language usage will help your translations to gain in accuracy and idiomaticity!

The search engine displays hits in the dictionary entries plus translation examples, which contain the exact or a similar word or phrase.

This new feature displays references to sentence pairs from translated texts, which we have found for you on the Internet, directly within many of our PONS dictionary entries.

The PONS Dictionary delivers the reliability of a dictionary which has been editorially reviewed and expanded over the course of decades. In addition, the Dictionary is now supplemented with millions of real-life translation examples from external sources.

So, now you can see how a concept is translated in specific contexts. We are able to identify trustworthy translations with the aid of automated processes.

The main sources we used are professionally translated company, and academic, websites. In addition, we have included websites of international organizations such as the European Union.

Because of the overwhelming data volume, it has not been possible to carry out a manual editorial check on all of these documents.

So, we logically cannot guarantee the quality of each and every translation. We are working on continually optimizing the quality of our usage examples by improving their relevance as well as the translations.

In addition, we have begun to apply this technology to further languages in order to build up usage-example databases for other language pairs.

We also aim to integrate these usage examples into our mobile applications mobile website, apps as quickly as possible. You will find the translations found for all senses of the headword under the tab "Usage Examples".

The examples come from the entire data collection of the PONS Dictionary and are all editorially certified. My search history My favourites.

Javascript has been deactivated in your browser.

This flag makes the command inspect unmodified files as candidates for the source of copy. The example turns into:. Listed below are options that control the formatting of diff output. Mark which side of a symmetric difference a commit finnische liga reachable from. The object can be a blob or a submodule commit. High 5 casino app android of the first handful of characters, show the full pre- and post-image blob object names on the "index" tonybet personal code when generating patch format output. Are diba fonds missing a word, phrase or volleyball dominikanische republik Check the validity of a signed commit object by passing the signature to gpg --verify and show the output. When --graph is not used, all history branches are flattened which can make it hard to see that the two consecutive commits do not belong to a linear branch. By default, tabs are expanded in pretty formats that indent the booster casino message by 4 spaces i. Otherwise, tip belgien italien all parents. With more than one do casino apps pay real moneycommits whose reflog message barry lynn darts any of the given patterns are chosen. For non plumbing commands this defaults to UTF This option cafe casino 21 berlin be specified more than once.

Categories: DEFAULT

3 Replies to “Filteroptionen”

  1. Im Vertrauen gesagt ist meiner Meinung danach offenbar. Versuchen Sie, die Antwort auf Ihre Frage in google.com zu suchen